Introduction to CT High-Pressure Injector Syringes
The CT high-pressure injector syringe is a critical component used in CT contrast-enhanced scans or angiography to accurately deliver contrast agents (e.g., iodinated contrast) and saline. Our high-pressure injector syringes feature a universal design, compatible with over 95% of mainstream high-pressure injector brands (e.g., ANKE, Tykoo, antmed, Bayer, etc.), ensuring seamless integration with various models to meet diverse clinicalneeds.
1. Uncompromised Precision for Diagnostic Clarity
Advanced flow control algorithms eliminate contrast media waste and ensure optimal bolus timing for crystal-clear vascular imaging. Ideal for coronary CTA (98% lesion detectability) and neurological studies
2. Multi-Scanner Versatility
Seamlessly integrates with ACIST CVi®, Siemens Artis, and 64-slice dual-source CT systems. Dual-tube design supports simultaneous contrast-saline injection, reducing renal toxicity risk by 30% .
3. Zero-Complication Safety Architecture
Smart Pressure Monitoring: Halts injection at 5% pressure deviation to prevent extravasation (clinically validated in 10,000+ cases).
Eco-Design: Radiolucent components eliminate MRI interference; non-latex seals prevent allergic reactions.
4. Workflow Revolution
One-Button Protocols: Pre-sets for pulmonary/abdominal angiography, pediatric dosing (saves 40% setup time).
DICOM 3.0 Sync: Auto-logs injection parameters into PACS for compliance audits.
5. Sustainability Edge
Recyclable casing + 50% lower fluid waste vs. manual injection. FDA 510(k) cleared for high-volume clinics (500+ procedures/month).
Why Clinicians Choose PrecisionFlow
"Reduced contrast leakage to 0.3% in 200ml abdominal CTAs, versus 4.2% with manual syringes" — Radiology Journal.
Step-by-Step Guide:Patient & Equipment Preparation
- Verify patient's vein condition and select a suitable catheter (e.g., 20G or larger).
- Attach the venous access device to the patient's arm, ensuring secure fixation.
- Connect the syringe to the venous line using low-pressure tubing.
Load Syringes with Contrast Media/Saline
- Insert a sterile contrast media syringe and saline syringe into the injector.
- Purge all air from the syringes and tubing by activating the "Air Purge" function.
Program Injection Parameters
- Set injection rate (0.1–10 mL/s), total volume (1–200 mL), and pressure limit (100–300 psi) via the touchscreen interface.
- Enable "Dual Injection" mode for sequential contrast and saline delivery.
Execute Injection
- Initiate injection via the remote control or main console.
- Monitor real-time pressure feedback and adjust settings if necessary.
- Use "Pressure Monitoring" to detect extravasation or blockages.
Post-Procedure Steps
Disconnect the syringes and flush the system with saline.
Key Features:
Precise pressure control
Direct pressure sensor ensures real-time monitoring, reducing tissue damage from overpressure.
Multi-function injection mode
Supports up to 8 injection phases for complex CT/MRI protocols, enhancing diagnostic accuracy.
High compatibility design
Works with MRI/CT systems and various contrast agents, featuring 200 mL large-capacity syringes.
Safety protection mechanism
Dual safety features: independent pressure limit detector and "Test Injection" function to prevent errors.
Easy to operate
Dual control panels (console + remote) and touchscreens simplify setup, even in crowded imaging rooms.
Sterilized Disposable Syringes
|
|
Precision High-Pressure Syringe for Medical Imaging: Enhanced CT/MRI Scans with Auto-Regulation & Dual-Channel Design Images
|
